Emergency operation
Changing batteries and notices
6 Changing batteries/Energy operation
Kelvinator Air Conditioning
1 Push the back cover of wireless remote control.
(As shown in Fig 1.)
2 Take out the old batteries.
3 Insert two new AAA1.5V dry batteries, and pay attention
to the polarity. (As shown in Fig 2.)
4 Attach the back cover of wireless remote control.
Note:
• When changing the batteries, do not use old or varied
batteries, otherwise, it may cause problems with the
remote control.
• If the remote control is not used for a long time, please
remove the batteries as old batteries may leak or corrode
and damage the remote controller.
•
away from the TV or stereo equipment.
• For correct operation the remote control should be
placed within visible range of the air conditioner.
• If the remote control does not operate normally, please
remove and refit the batteries. If abnormal operation
continues, replace with new batteries.
• To operate the air conditioner, please point the remote
control at the indoor unit in order to improve the
sensitivity of the main unit.
1
3
4
2
Fig.1
Fig.2
When the remote control is lost or damaged, please use
the manual switch on the main unit. In that case, the unit will
operate in AUTO mode and the temperature setting or fan
speed can not be changed.
The manual switch can be operated as below:
AUTO SWITCH
Turn on the unit
Press AUTO/STOP button to enter AUTO mode.
The air conditioner will select the mode (COOL, HEAT,
FAN) automatically according to the room temperature for
reaching best comfort.
Turn off the unit
Press the AUTO/STOP button to switch off the unit.
The operation mode is seen in the following table.
Mode
Model
Temperature setting
Airflow rate
AUTO
COOLING
25°C (COOL, FAN)
AUTO
AUTO
HEATING PUMP
25°C (COOL, FAN)
AUTO
AUTO
HEATING PUMP
20°C (HEAT)
AUTO
This switch is to be used only when the remote control
is missing.
To avoid interference, the remote should be placed 1m
