background image

 

 

Kelvinator Guarantee Conditions 

 

FOR DOMESTIC USE ONLY     

NOT FOR COMMERCIAL OR INDUSTRIAL USE 

 

ANY ALTERATION OR MODIFICATION OF THE EQUIPMENT VOIDS THE GUARANTEE 

 

FAILURE  TO  USE  A  CERTIFIED  ELECTRICIAN  OR  KELVINATOR  AUTHORISED 

SERVICE AGENT OR GENUINE PARTS FOR INSTALLATION OR SERVICE VOIDS THE 

GUARANTEE 

 

1. Kelvinator guarantees the equipment against defective material or faulty manufacture, provided it is 

used for domestic purposes only, for a period of 24 (twenty four) months, from the date of purchase by 

the original retail purchaser. This guarantee only applies to Kelvinator large appliances.   

 

2.  (a)  In  the  first  6  (six)  months  from  date  of  purchase,  for  valid  guarantee  claims,  collection,  return 

and  installation  (Built-in  and  gas  appliances)  of  the  appliance  will  be  free  of  charge  within  South 

Africa if installed by an authorized Kelvinator service agent. 

        (b)  For  the  remainder  of  the  guarantee  period  where  the  repaired  appliance  is  used  or  installed 

more than 50 kilometres from the nearest Kelvinator service agent or elsewhere in South Africa, travel 

costs to the place of use or installation shall be for the account of the purchaser. 

   

3. This guarantee is given on condition that only labour, parts and accessories supplied by authorised 

agents are at all times used in connection with the appliance, including the installation thereof, and that 

an authorised Kelvinator service agent installs and/or services the appliance.     

 

4.  Kelvinator  shall  not  be  responsible  for  damage  of  any  kind  resulting  from  electricity  fluctuations, 

faults  in  the  building  wiring,  faulty  installations,  and  improper  use  of  controls  or  failure  to  use  the 

appliance in accordance  with  the operating instructions and/or general  misuse and/or abuse, or if not 

used for domestic purposes only, or for damage caused by a superior force (

vis maior).

 Any repair or 

tampering by an unauthorised person or attempt to repair or tamper with the equipment, or use of parts 

not  supplied  by  authorised  agents,  or  alterations  or  modification  to  the  equipment,  shall  render  the 

guarantee null and void. 

 

5. After the first 6 (six) months from the date of purchase, this guarantee does not apply to light bulbs, 

loose glass, glass oven doors and enamelled surfaces, filters and other parts subject to wear and tear or 

discolouring, as well as damage caused by abrasive and highly concentrated cleaners and/or cleaning 

materials or cleaners prohibited by the user manual. 

 

Summary of Contents for KHG640SS2
























Reviews: