background image

 7 

 

 
 

MAINTENANCE

 

 

ANY ADJUSTMENT, MAINTENANCE, ETC. MUST BE CARRIED OUT 
WITH THE HOB UNPLUGGED AT THE MAINS. 

 

INSTRUCTION FOR USE 

 

Before cooking for the first time, it is necessary to clean the surface of the 
appliance. This should be done using only recommended ceramic hob 
cleaners.  
After cleaning, the appliance should be operated ion the following manner 
to remove any residues or moisture that may be present within the 
appliance: one at a time, turn the heating plates on and set at maximum 
and operate (without pans) for a period of 5 

mins

, then turn off. An odour 

may be given off during this operation, this is normal. 
 
 

Knob 

setting 

Cooking operation 

Off 


For melting processes (butter or 
chocolate) 

For keeping foods hot and heating small 
amounts of liquids 

For heating larger amounts and beating 
custards and sauces 

Slow boiling, for soups, pasta and 
risotto, continuing steaming processes, 
and cooking steaks and fried foods in 
general 


Browning meat, roasted potatoes, fried 
fish, bringing large amounts of water to 
the boil 

 

 

Quick frying, char-grilled steaks, ect. 

Summary of Contents for KHC601BL

















Reviews: