Kelvinator gas continuous flow hot water systems
operation 7
Initial operation
4. Turn on the 240 volt 50 Hz power supply to the
water heater.
5. Now you are ready to enjoy hours of endless hot water.
caution
The following process should be completed by the
installer only
Once all checks have been completed, please clean filter of
any debris. Refer to page 10 for instructions.
1. Fully open the manual water control valve on the water
supply line.
2. Open a hot water tap to verify that water is flowing to
that tap then turn the tap off.
3. Fully open the manual gas control valve installed.
Summary of Contents for KGC20BLA
Page 1: ...Gas Continuous Flow Hot Water System User Manual ...
Page 12: ...12 notes Kelvinator gas continuous flow hot water systems Notes ...
Page 13: ...Kelvinator gas continuous flow hot water systems notes 13 Notes ...
Page 14: ...14 notes Kelvinator gas continuous flow hot water systems Notes ...