9
Epos 300 User Manual www.kelvinlight.com
5.3 Mounting the Epos 300 to a Light Stand / Bracket
Loosen the mounting lock and place the receiver over the light stand’s 5/8-inch pin (Baby Pin). Tighten the handle
until secured with the mounting screw on the Baby Pin Receiver.
Junior Pin also works fine (28mm stand). Get started by mounting the Lamp Head into the Junior Pin receiver and
adjust it smooth in place with the handle on the stand.
Adjust the angle of the light by using the lock mechanism on the Yoke to tilt the fixture into your preferred position.
Note: If you’re unable to turn the tilt lock handle 360°, pull the handle out, reposition it, and push it back in until it
reengages.
