17
Epos 300 User Manual www.kelvinlight.com
(3200K), daylight (5600K) and cloudy (7200K).
-
Neutral button (next to the tint slider) resets the tint point to neutral (0.0
Δuv).
7.3 Mode HIS
HSI mode is used for setting the light output with hue and saturation. The white point of the HSI mode can be set to
either standardized color spaces (S RGB, Adobe 1988, Adobe Wide or Pro Photo) or to the color space of the Epos
300 (Device). When
device
color space is selected, the white point can be further adjusted.
Knob control:
-
Turn the middle knob to adjust the hue in degrees (0
O
-360
O
) and loop back around if the endpoints are
exceeded.
-
Press the right knob to toggle between adjusting the saturation or the white point (only if device color space
is selected). Parameter labels turn yellow to indicate which parameter is selected for adjustment.
-
Turn the right knob to adjust the saturation (by default) or the white point if selected.
Touch control:
-
Pressing/dragging the HSI color map adjusts the hue (horizontally) and saturation (vertically).
-
Color space dropdown selects color space (Device, S RGB, Adobe 1988, Adobe Wide or Pro Photo).
-
The white point slider adjusts the white point if
device
color space is selected.
7.4 Mode RGB
