4
5. Using one of the GOLD poles, follow the seam
directly under the pole to a corner (figure 4A).
Figure 5A
Figure 5C
Figure 5B
7. Repeat steps 5 and 6 on opposite side of the tent.
The gold poles should cross over each other twice. The tent will
start taking shape at this point.
8. Using the BLACK pole, follow the seam directly
under the pole to the center of either the front or
back of the tent (figure 6).
Figure 4A
6. Insert the spring pins on the black webbing
located by the floor seams at each corner of the
tent into the end of the pole (figures 5A, 5B and
5C).
Repeat for the other gold pole on the SAME side.
Figure 6
3
SETTING UP YOUR TENT
2. Spread the tent body on the ground.
3. Slide a long GOLD pole through a long pole sleeve
that parallels the long side of the tent (figures 2A
and 2B).
Repeat for the other long pole and other long pole
sleeve.
Figure 1A
Figure 1B
Figure 1C
1. Assemble the poles (figures 1A, 1B and 1C).
Avoid having the shockcord snap the pole sections together,
this can damage the poles.
Figure 2A
Figure 2B
4. Slide short BLACK pole through the short pole sleeve
that crosses over the center of the tent (figure 3A).
Make sure the black pole lays over the two gold poles.
Figure 3A
