2
CHASSIS INFORMATION
ASCENDER 22 CHASSIS continued
BAG ATTACHMENT
Ascender bags are attached to the frame using 4 plastic hooks. Start by placing the bag on
the frame making sure the wheel wells on the bag match those on the frame. Thread hooks
through corresponding loops and pull the webbing to secure.(Fig. 5a - 5f)
To remove the webbing and hooks from the frame, thread the plastic loop through the frame by
twisting sideways. ( Please note - it is not necessary to remove the webbing and hook unless
you are attaching an alternate bag with a different webbing color.)
HANDLE
To extend the handle, pull up. There are 2 extension levels noted by “clicks”.(Fig. 3)
To collapse, reverse until the handle clicks into place
HANDLE TIE DOWN
The Ascender chassis has an additional carry strap attached to the handle. When the handle
is collapsed, connect the side release buckle to prevent unexpected handle extension.(Fig. 4)
This strap also doubles as a convenient carry handle when rolling.
(FIG. 3)
(FIG. 5a)
(FIG. 4)
(FIG. 5e)
(FIG. 5d)
(FIG. 5f)
(FIG. 5b)
(FIG. 5c)
