Kellys E-CARSON 10, Owner'S Manual

Page: 14 / 54

EN
OWNER'S
MANUAL EBIKE
14
NOTICE
Do not exceed the maximum pressure values indicated on the shock absorber!
Never disassemble the shock absorber! If you suspect that the shock absorber is not working properly,
is leaking oil, is losing its ability to absorb shocks, or is making abnormal noises under load, we
recommend that you contact a professional service centre. Before each ride, check that the bolts
securing the shock absorber to the frame are tight. Keep the shock absorber clean, wipe off any dust
or moisture with a soft cloth after each ride. Never use high-pressure tools for cleaning!
SHOCK ABSORBER MAINTENANCE:
• After each ride, clean the sliding surfaces of the shock absorber and the seal of debris such as dust,
moisture, or mud
• Every 25 hours of operation (or always after riding in extreme conditions in wet environments such
as mud, wet sand):
1. Lubricate the shock absorber piston, sealing and moving joints of the shock absorber with Teflon
oil
2. Check if any parts of the shock absorber are damaged. Never ride on a damaged shock absorber!
• Every 50 hours of operation – we recommend that you have your shock absorber serviced by
a professional bike shop
REAR CARRIER
• If the e-bike frame is equipped with holes for mounting the carrier, a rear carrier can be mounted.
• Always use a carrier/child seat compatible with the frame type.
• Always follow the carrier/child seat manufacturer's instructions and do not overload the carrier/
child seat.
• Never overload the e-bike. The total weight of the rider together with the e-bike, accessories and
luggage must not exceed the maximum permissible weight marked on the frame of the e-bike.
KICKSTAND ASSEMBLY
On some models, holes are provided on the left chain stay for mounting a special kickstand. If there
is no preparation for mounting a kickstand on the e-bike and you still want to mount another type
of kickstand, make sure that the mounting or use will not damage the frame, damage brake hoses or
electrical cables, and that the kickstand you will use is strong enough for the weight of your e-bike.
ASSEMBLY OF THE SIDECAR
Kellys e-bikes are not specifically adapted for the use of a sidecar or trailer bikes. When using the
above or similar accessories, follow the instructions of the manufacturer of the sidecar or trailer bike.
Do not overload the e-bike!
IMPORTANT NOTICE
If you use your e-bike on the road in reduced visibility, you must retrofit it with lighting and reflectors
according to the regulations in force in the country where you are using it.
Always wear a bike helmet when riding! Most bicycle accidents result in head injuries. When
buying a helmet, make sure it is the right size, the helmet must fit properly on the head, it must be
comfortable in every way. Get a helmet with an adjustable clamping mechanism to secure the helmet
securely on your head.
SAFE USE OF THE PRODUCT
NOTICE
Disassemble the battery before fitting parts to the e-bike. Otherwise, electric shock may occur.
Do not move the e-bike while the battery installed on the e-bike is charging. The mains plug of the
battery charger can thus become loose. A loose charger plug or one that is not fully plugged into the
mains socket poses a risk of fire.
When using this product, be sure to follow the instructions in the owner's manual. In addition, it
is recommended that you only use original parts according to the original specification or the