Kelly KLS-N Brushless Motor Controller User
’s Manual
V 2.5
12
3.2 Connections
3.2.1 Pin definition of KLS-N Controller
Figure 7:
waterproof connector
1
，
The switch signal is valid to 12V
2
，
12V only can be used for LED or switch signals.
3
，
Boost and brake analog regen use the same port on pin2.
4, CAN bus is not included in KLS-N controller by default.
When boost is disabled in user program
，
pin2 is used as brake analog regen mode.When boost
is enable
，
pin2 is used for boost function.You may not use two functions at the same time.
