Kelly KLS-N Brushless Motor Controller User’s Manual
V 2.7
19
throttle or pedal. Range: 1~2
(9)TPS Dead Low: TPS Dead Zone Low. Range: 5~40
Functional description: Set throttle effective starting point
Suggestion: Set according to the practical situation, factory default is 20%*5V=1.0V.
(10)TPS Dead High: TPS Dead Zone High. Range: 60~95
Functional description: Set throttle effective ending point
Suggestion: Set according to the practical situation, factory default is 80%*5V=4.0V.
(11)Brake sensor type: Brake sensor type for brake variable regen mode:
1:0-5V 3-wire 0-5K pot,5K is normal,2K-20K can be used;2:Hall active throttle or pedal. Range:
1~2
(12)Brake sensor Dead Low: Brake sensor Dead Zone Low. Range: 5~40
Functional description: Set throttle effective starting point
Suggestion: Set according to the practical situation, factory default is 20%*5V=1.0V.
(13)Brake sensor Dead High: Brake sensor Dead Zone High. Range: 60~95
Functional description: Set throttle effective ending point
Suggestion: Set according to the practical situation, factory default is 80%*5V=4.0V.
(14)Max output Fre: Max output frequency. Unit:Hz
Functional description: It will affect the top speed of the motor.
Suggestion: Set according to the practical situation, factory default is 1000Hz.Please don’t set it
1000Hz above.
(15)Max Speed: Max Speed [rpm]. Range: 0~15000
By default, it is set at 4000.Software version 0109 can support 15000RPM settings in user
program.
(16)Max Fwd Speed %: The forward speed of the percentage of maximum speed. Range:
20~100
By default, it is set at 100%
(17)Max Rev Speed %: The reverse speed of the percentage of maximum speed. Range:
20~100
By default, it is set at 100%
Midspeed Forw speed, Midspeed Rev speed, Lowspeed Forw speed and Lowspeed Rev
speed.Range: 20~100 By default, it is set at 100%.Both F-N-R control and three speed function
used the same pin12.Needless to say,we can not use both functions at the same time.Three
Gears switch is supposed to enable F-N-R control.When this item is disabled,we can use three
speed function,vice versa.
Pin22 is low speed switch input port while Pin12 is high speed switch input port.When both
pin22 and pin12 are disconnected from pin11,the controller is driving with medium speed mode.
