Kelly KLS-H, User Manual

Page: 9 / 35

6
KLS72501-8080H 500 200 24-72
KLS72601-8080H 600 240 24-72
KLS72701-8080H 700 280 24-72
KLS96301-8080H 300 120 24-96
KLS96401-8080H 400 160 24-96
KLS96501-8080H 500 200 24-96
KLS96601-8080H 600 240 24-96
1.60V model: range of the batteries voltage is 18V-80V.
2.72V model: range of the batteries voltage is 18V-90V.
3.84V model: range of the batteries voltage is 18V-105V.
4.96V model: range of the batteries voltage is 18V-120V
Chapter 3 Wiring and Installation
3.1 Mounting the Controller
The controller can be oriented in any position which should be as clean and dry as possible,
and if necessary, shielded with a cover to protect it from water and contaminants.
To ensure full rated output power, the controller should be fastened to a clean, flat metal
surface with four screws. Applying silicon grease or some other thermal conductive material to
contact surface will enhance thermal performance.
Proper heat sinking and airflow are vital to achieve the full power capability of the controller.
The case outline and
mounting holes’ dimensions are shown in Figure 1,2,3,4.