Kelly KLS-8080N/NPS KLS-180N/NPS Sinusoidal BLDC/PMSM Controller User
’s Manual V1.11
31
4.5 How to use Identification angle operation for KLS-8080NPS and
KLS-180NPS controller
We must do Identification angle operation before running motor for all KLS controllers. The
Identification angle operation can be done in PC program or Android App(Tablet or Cell Phone).
KLS-8080NPS controller is designed for BLDC or PMSM motor with Sin/Cosin sensors. By
default, the speed sensor type is set at 4 from factory setting for KLS-8080NPS and
KLS-180NPS controller.
1,Please hook up the controller for identification angle operation according to the wiring
diagram below. Please make sure there is no load on the motor shaft before starting the
programming. The KLS-8080NPS is designed by opto-isolated technology. We specify 8-30V
for power supply pin7 vs pin6 which must be isolated from main battery pack B+/B-.Usually
customers can use 12V car battery or 12V Isolated type DCDC converter for this purpose.
