Kelly KDS Small Series/PM Motor Controller User
’
s Manual
V 2.7
8
Figure 5: Definition of Controller’s junction
(9)PWR(red): Controller power supply, usually to key switch.
(1)GND(black): LED cathode and sensor return.
(4)Contactor Coil Driver(green): It’s a low side driver. Please use PWR as the coil high side.
(2)LED(brown): To anode of LED.
(7)Throttle 5V power source(orange)
：
0-5V throttle power input.
(6)Throttle(blue): 0-5V throttle input.
(8)GND(black): TPS return and switch ground.
(5)Micro_SW (white): Close to GND to activate. Default as throttle switch.
Notes: All of the above GND pins are internally connected.
