Kelly KBS Brushless Motor Controller User’s Manual
V 4.1
12
Suggestion: Set according to the practical situation, factory default is Disable.
(2)Foot Switch
Value range: Enable and Disable
Functional description: If enabled and turn off foot switch, controller will not operate. Please see
figure 4.1.
Suggestion: Set according to the practical situation, factory default is Disable.
Configuration
Pin Status
Running
Status
Forward
Switch
Foot Switch Micro_SW
(15)
REV_SW
(14)
Enable
Disable
OFF
OFF
Neutral
ON
OFF
Forward
OFF
ON
Back
ON
ON
Neutral
Disable
Enable
OFF
x
Not operate
ON
OFF
Forward
ON
ON
Back
Disable
Disable
x
OFF
Forward
x
ON
Back
Figure 4.1
(3)Throttle Sensor Type
Value range: 3-wire resistive pot, hall active throttle.
Functional description: Set throttle sensor type.
Suggestion: Set according to the practical situation, factory default is 3-wire resistive pot.
(4)Throttle Effective Starting Point
Value range: 10%-40%
Functional description: Set throttle effective starting point
Suggestion: Set according to the practical situation, factory default is 10%.
(5)Throttle Effective Ending Point
Value range: 60%-100%
Functional description: Set throttle effective ending point
Suggestion: Set according to the practical situation, factory default is 90%.
(6)Max Motor Current
Value range: 20%-100%
Functional description: The max motor current is (The Value * Peak Current of the Controller).
Suggestion: Factory default is 100%.
(7)Max Battery Current
Value range: 20%-100%
Functional description: Set max battery current so as to protect battery. A lower value means a
lower battery output current and better protective effect. But excessively low value will affect
acceleration.
