8
CONNECTING
Be careful when you connect the grassland harrow to the tractor. Keep an eye on the work area
around the tractor at all times when working with the harrow. When working, take particular
care that the harrow does not hit any external obstacles, especially when turning. Lower the
harrow to the ground before leaving the tractor cab.
•
Connect the machine to the tractor's rear three-point linkage.
•
Do not forget to fit the locking pins.
•
Connect the equipment to the tractor's hydraulic arms. Connect the hose from the drive
hydraulics of the side sections to the tractor's outlet. Connect the pressure rod so that the
equipment is satisfactorily raised at the rear. Adjust the length of the pressure rod so that
the harrow stands level in lowered position.
•
Ready for use.
ADJUSTMENT OF MACHINE'S POSITION
•
Lower the tractor's hydraulic arms completely.
•
While harrowing, check that the harrow frame is parallel with the ground. Adjust the
pressure rod if necessary.
HARROWING
•
Fold down the side sections while the equipment is stationary.
•
Check that the area underneath it is free of obstructions.
•
Always adjust speed during operation.
TIGHTEN ALL BOLTS AFTER AROUND 2 HOURS OF OPERATION!!!
36-BH400
