Kellfri 35-WKL140, Manual

Page: 15 / 36

15
Table of Contents
TROUBLESHOOTING MEASURE
The verge flail mower cuts unevenly
or badly Check that all flails are intact and firmly in position.
Adjust the support roller and check that is in the correct position.
Check the drive belts and tighten if necessary.
The cutting sound changes Check the roller.
Check the tension of the drive belts.
Check the flails.
Vibrations Check the flails.
Hydraulics do not work Check hoses and connections.
Mounting of hammer flail onto verge flail mower.
90 mm
40 mm
WARNING! NEVER mount different types of flails on the mower.
When the flails have been mounted, always check the tightness of the flail screws.
Ensure that all screws are fully tightened.
Hammer flails can be replaced with Y-flails (not included, may be purchased additionally).
Article no. for Y-flail: R35-SK180.003
Spacers R35-VKM175.008
FLAILS