manualshive.com logo in svg

Kellfri 35-VKMATV120H, Operating Instructions Manual

Share
Download
Kellfri 35-VKMATV120H Operating Instructions Manual Download Page 9

9

Table of Contents

PREVENT FIRE

• 

Use the correct fuel specified for your machine. Unsuitable fuel, such as kerosene, must not be used.

• 

Wipe off spilt fuel with a clean cloth.

• 

Smoking and open flames are prohibited in the vicinity of the machine. Petrol can ignite easily.

• 

Keep explosive and flammable materials away from a machine with a combustion engine, as  
the exhaust system generates high temperatures during operation and can cause fire or explosion. 

• 

In order to prevent fire and to keep the generator/engine well ventilated, the machine should  
be placed at least 1.5 m away from buildings or other equipment during operation.

• 

Always place the machine on a level surface. There is a risk of fuel spillage if the machine is placed 
on an incline. 

Refilling/measuring stick

max. level

min. level

Refill with engine oil 15W-40, 1 L

Check the level by withdrawing the measuring stick. The oil level should be between min. and 

max.

REFILLING WITH ENGINE OIL

  CAUTION!

 This machine is delivered without oil!

       Fill up the tank 

BEFORE USE!

       IMPORTANT! 

Check and lubricate

           all grease points before use!

                 VARNING!

          Maskinen levereras utan olja!

      Fyll på olja 

INNAN ANVÄNDNING!

          VIKTIGT!

 Kontrollera och smörj

        alla smörjpunkter innan körning!

The machine is supplied without oil! 

Refill with oil 

BEFORE USE! 

IMPORTANT! 

Check and lubricate  

all grease points before operation!

WARNING! 

Summary of Contents for 35-VKMATV120H

































Reviews:

No comments

Brands by name

Popular brands

Load more brands