Kellfri 27-HTFL2E, Manual

Page: 3 / 24

3
Table of contents
Kellfri AB has a policy of continuous product development and therefore reserves the right to
make modifications, e.g. to the design and appearance of the product, without prior notice.
INTRODUCTION
Thank you for choosing a product from Kellfri AB. Compliance with the safety instructions,
operating manual and sound common sense will guarantee many years of enjoyment using
the product. Kellfri’s attachments and products are aimed at self-employed farmers, horse en-
thusiasts and other country-dwellers who have stringent demands on performance.
PRODUCT INFORMATION
Hydraulic hedge and branch trimmer for mounting on frontloaders.
• Working width 140 cm.
• Fitted with horizontally and vertically adjustable cutterbar.
• Bolted separate blades on the cutterbar.
• Electric valve
• Cuts branches up to 35 mm.
Clears an overgrown road quickly where branches block the road and damage lorries and
other vehicles. A cutterbar height of 140 cm in combination with the lifting height of the front-
loader ensures a clean and high corridor for vehicles to pass through.
The hydraulic motor is 125 CC, and can achieve 278 Nm with 75 litres and 240 bar.
It has a speed of 599 rpm.
Superior hedge trimming capacity where tractor access is possible.
Cutterbar with bolted separate blades for quick replacement of damaged blades.
AREA OF USE
For trimming hedges, clearing field edges and maintaining roads and forestry access roads.
TECHNICAL DATA 27-HTFL2E 27-HTFL2T
Working width 1400 mm 1400 mm
Length 3079 mm 3079 mm
Width 706 mm 706 mm
Height 545 mm 545 mm
Bracket Euro Trima
Oil flow 15 l/min 15 l/min
Weight 119 kg 119 kg
Warning!
Compliance with the safety instructions requires that the product is only used as described
in these instructions. It is the user’s responsibility to read through the instructions and com-
ply with them.
RE-TIGHTEN ALL BOLTS AFTER 1 HOUR OF OPERATION.