11
DRILLING
1. Hold the earth auger with both hands. Hold the auger steadily
in place so that you do not spin when the drill tip rotates.
The auger can also be used by two people, one on each side.
To avoid accidents, it is important that both people understand
the safety information and the risks involved.
2. Place the drill tip on the spot where you want to drill. Start
drilling, staying focussed while operating. Stop the engine in
the case of severe vibration or strange noises. Check the drill
bit and drill tip.
3. Always plan your work; long periods of drilling without breaks
will tire you out. Take breaks now and again while drilling.
MOUNTING THE DRILL
Connect the drill to the engine’s drive shaft, attach and secure
with nut and bolt and tighten.
The anti-vibration system does not guarantee that you will not suffer from
vibration white fingers. Always check your hands and fingers carefully when
using this machine continuously and regularly. See a doctor immediately for
a closer examination if you notice anything unusual in your hands or fingers.
Summary of Contents for 27-EA52
Page 14: ...14 ENGINE...
