background image

4

INSTRUCTIONS FOR EMERGENCY SITUATIONS

In case of emergency, call 112.

Always have a mobile phone or emergency phone available when working alone. A first-aid 

kit and fire extinguisher must be kept in an easily accessible location when carrying out any 

work, maintenance or service.

USE

Only those who understand the safety instructions and the instruction manual may use the 

product. Exercise caution and care when working with the product and only use it in the way 

described in the instruction manual.

Kellfri is not liable for any modifications, changes or rebuilds carried out by customers.

STEPS TO TAKE BEFORE ASSEMBLY

Carefully read the safety instructions and the instruction manual. Make sure that you under-

stand the safety information and the instruction manual. Use common sense and suitable  

personal protective equipment when using the product.

MAINTENANCE AND CARE

1.  If any part of the structure is damaged during use, replace the damaged part in order to 

avoid further damage and to keep the structure in good condition. Only use spare parts 

with equal performance to reduce the risk of injuries and breakdowns.

2.  When replacing components, ensure that they are attached correctly.

3.  When replacing the fabric cover, ensure that conditions are not too windy. When remov-

ing the fabric cover, ensure that the ropes are removed and that the cover does not get 

caught on the way down. Avoid using heavy equipment to pull off the cover.

4.  To extend the service life of the fabric cover, place soft material such as foam rubber on 

the frame where it comes in direct contact with the cover. This will reduce wear between 

the cover and the frame.

5.  At regular intervals, at least twice per year, the interior and exterior of the structure should 

be inspected to ensure that it is still correctly installed and secure. Check that all bolts and 

other attachments are in place and tightened. Check that the base plates are still in place, 

and whether the ropes require tensioning. Clean the structure with a suitable cleaning 

agent. If dirt and litter are allowed to remain on the cover for an extended period, this will 

damage the cover.

Kellfri AB has a policy of continuous product development and therefore reserves the right to 

make modifications, e.g. to the design and appearance of the product, without prior notice.

TRANSPORTATION AND SET-UP

Always keep the product on a dry surface, preferably under a roof, when not in use.

Ensure that the equipment or product is stable and cannot fall over. Never permit children to 

play at the storage site.

RECYCLING

When scrapping, the product should be dismantled and transported to a recycling station 

designated by your local authority. Contact your municipality for further information.

Summary of Contents for 25-T300K









Reviews:

Related manuals for 25-T300K