background image

3

Table of contents 

INTRODUCTION

 

Thank you for choosing a product from Kellfri AB. Compliance with the safety instructions, 

operating manual and sound common sense will guarantee many years of enjoyment using 

the product. Kellfri’s equipment and products are aimed at self-employed farmers, horse 

enthusiasts and other country-dwellers who have stringent demands on performance.

PRODUCT INFORMATION

• Profile-pressed flaps and fixed headboard 

• Sheet metal covered floor 

• Spreader tailgate 

• Bogie shaft and heavy-duty tyres

Sleek and powerful bogie trailer for your ATV. Perfect on the farm, in the garden and in terrain. 

Winch-assisted tipping. The trailer is galvanised, equipped with a tiltable floor, as well as fold-

down tailgate and sides. Substantial wheels and a ground clearance of 290 mm allow for 

smooth manoeuvres in difficult ground conditions. Max. load 1,500 kg. 50 mm ball coupling 

supplied as standard.

APPLICATION

Intended for transporting loose materials such as hay, leaves, signel itesm, soil, etc. Take into 

account load capacity, safety regulations and recommendations. 

TECHNICAL DATA

23-TV15ATV

Total length

3,040 mm 

Floor length

2,010 mm

Width

1330 mm

Headboard height

300 mm

Weight

310 kg

Load capacity

1500 kg 

Wheels

22 x 11-10

Tyre pressure (Maximum pressure must not 

be exceeded)

See info on the sidewalls of the tyres

Tipping angle

55 °

Ball coupling

50 mm 

Ground clearance

290 mm

23-TV15ATVFH (Optional)

27 kg

Summary of Contents for 23-TV15ATV

























Reviews: