Kellfri 21-SV60, Operating Instructions Manual

Page: 27 / 32

27
CHANGING FREQUENCY
1. Start the transmitter
2. Press the OFF button and keep it pressed
3. Within 3 seconds: Press the ON button: Keep both buttons pressed
4. Release both buttons
5. Within 5 seconds:
a. Press the transmitter’s IN button to move up a row in the frequency table
(see the frequency table)
b.) Press the transmitter’s OUT button to move down a row in the frequency table
(see the frequency table)
6. The red LED light flashes three times when the frequency has changed. The transmitter is
turned off automatically.
NOTE:
If you want to move up or down more than one step in the frequency table: re-start the
transmitter and carry out the previous steps one or more times.
There may be a slight delay for the transmitter to connect to the receiver when the frequency
is changed.
Channel
Frequency
Bank 1
MHz
1 433.075
2 433.175
3 433.275
4 433.375
5 433.475
6 433.575
7 433.675
8 433.775
9 433.875
10 433.975
11 434.075
12 434.175
13 434.275
14 434.375
15 434.475
16 434.575
Channel
Frequency
Bank 3
MHz
1 433.125
2 433.225
3 433.325
4 433.425
5 433.525
6 433.625
7 433.725
8 433.825
9 433.925
10 434.025
11 434.125
12 434.225
13 434.325
14 434.425
15 434.525
16 434.625
Channel
Frequency
Bank 4
MHz
1 433.250
2 433.350
3 433.450
4 433.550
5 433.650
6 433.750
7 433.850
8 433.950
9 434.050
10 434.050
11 434.150
12 434.250
13 434.350
14 434.450
15 434.550
16 434.650
Channel
Frequency
Bank 2
MHz
1 433.100
2 433.200
3 433.300
4 433.400
5 433.500
6 433.600
7 433.700
8 433.800
9 433.900
10 434.000
11 434.100
12 434.200
13 434.300
14 434.400
15 434.500
16 434.600
FREQUENCY TABLE