Disposal
This product must not be disposed of
as normal household waste at the end
of its useful lifetime. To prevent pos-
sible damage to the environment or to
health due to uncontrolled waste dis-
posal, this product must be separated
from other waste and
recycled correctly in
order to ensure sus-
tainable use of the raw
materials.
8. Software for calibrators
The USB interface converter
(K-114A) enables communication bet-
ween the calibrator and a computer.
Before you connect the interface con-
verter to the computer, install driver
K-104 / K-114 (the software CD is in-
cluded in scope of delivery, K-114A, or
can be downloaded free of charge at
www.keller-druck.com)
Settings on the medium pressure
calibrator with the ManoConfig
software
Device settings such as the leak
measurement time or the switch-off
time for the calibrator can be adjusted
using the "ManoConfig" software.
Record measurements
with the CCS30 software
The CCS30 software records the data
measured by the pressure calibra-
tor, and shows them in both graphic
and tabular form. Measured data
can be saved or exported for fur-
ther processing. You will find more
information about the software in the
CCS30 manual.
Step-by-step software installation
Install from the CD or from
www.keller-druck.com:
1.) K-104 / K-114 driver
2.) (CCS30) Control Center Series 30
3.) ManoConfig (if desired)
ManoConfig
18
Control Center
CCS30