06
• Disconnect the installation from the electrical mains and ensure that it remains disconnected during
maintenance work!
Only qualified assembly / disassembly personnel may be entrusted with the disassembly.
Make sure only assembly / disassembly personnel is present at the installation site during the disassembly and
keep third parties at a distance, if necessary by using a safety tape.
Provide sufficient light when disassembling.
Make sure you are using the correct tools and that you are standing firm.
Always use gloves, safety shoes, hard hat and safety glasses.
Remove the power plug from the socket and secure against re-plugging during work.
Remove the front cover. Remove the top cover. Unscrew the carrier bracket. Disassemble the beam completely.
Pay attention sufficient support so that the beam does not fall when unscrewed.
Carefully lower the motor bar and remove it carefully following the local waste disposal regulations.
All parts of the automation are easy to separate and process again. After disassembly, separate the parts.
Note:
Material is only recyclable if it is returned separately. Hand in materials to the appropriate authority responsible is for
processing separated materials.
AB-Matic nv
Duifhuisstraat 37
3800 Sint-Truiden
Belgium
www.ab-matic.be
Operating instructions
smart slider - Operating instructions
06. Decommissioning / Disassembly / Disposal
6.1 Take out of operation
6.2 Disassembly General
6.3 Procedure
6.4 Removal
6.5 The manufacturer
12
Keller minimal windows
®
|
997-00220
| 05-2022
Keller minimal windows
®
