4
Screw the wall arm of the Exposed Arm Assembly onto the vertical
rail using the screws provided. Ensure the cable is not pinched by
the parts.
6
7
Exposed Installation
Insert Filters into the Collars and push the Shelf Mixer onto the
Collars. Ensure the Shelf Mixer is flush against the wall. If the
Shelf Mixer is not flush it may be because the inlet pipes from the
wall are too long. If so, cut the inlet pipes to length and fit the Shelf
Mixer again.
5
Using the Hex Key, tighten the Grub Screws underneath the Shelf
Mixer to secure the Shelf Mixer to the wall.
Drill the holes for the Wall Bracket. Then screw in the Wall
Bracket using the Wall Plugs and Screws provided.
12
Summary of Contents for BubbleSpa 95005000
Page 1: ......
Page 9: ...Installation 9...
