1.
Plug in and switch on by pressing the red switch 0/I, enter into standby mode and
display shows“
”:
2.
Press” “ button for one time, enter into fan mode and the display show “--”(photo
A) . Press second time , the product works in low heating and display shows like photo B
Press third time, changes to high heating and display shows like photo C , then Press fourth
time , enter into in standby mode and display shows“--”，like photo A. the cool fan will
work for 30seconds and enter into standby mode.
A B C
3
. Press” “ button to set timer(00-12hours). Pressing the button one time increases one
hour for timer. After setting time, the display will show current setting time for 5 seconds,
then resume to previous display, meanwhile the light of ” “ will on. Below photo is an
example of setting 8h:
