5. Set appointment turn-on time:
In standby mode, press”
“ button, you can set the
appointment turn-on time in 00-12 hours. After complete setting, the display shows the
appointment turn-on time and the light ” “ is on. The display automatically decreases 1
hour for each hour passed. When the appointment turn-on time arrived, the product will
automatically turn on. The default setting temperature is 23 ℃ during appointment
turn-on. Below photo is an example to set appointment turn-on time to 8 hours: (Fig.6)
Note: If not setting the temperature and weekly program, the product will automatically
turn off after 12 hours of continuous work.
Function operation (ONLY by remote control)
1. Set current TIME/DAY (can set both under standby mode & working status):
Press ” ”button for one time, the display shows ”12“ as default,press“ /
“button to set current hour; press “ “ button again, the display shows minute “ 30“,
press” / “button to set current minute ,then press “ “ button for third time,
the display shows the day“ ”, press “ / “ button to set current
day(Monday-Sunday: d1-d7) . Then press” “ button to confirm the setting.
For example: Setting to Wednesday, 9:30 AM, please refer to the following photos:(Fig. 7)
Note:
- After the product power off, it needs to be reset, then press” “ button to check the
current time & day in turn;
-The timer set up period is 00-23 hours, 00-59 minutes.
2.Set temperature
During working status, Press“
/ “button ,the display shows ” “ as default.
Press ” / “ button to set desired temperature (temperature range 10-49℃), press”
“ button to confirm the setting.
