![background image](http://html2.mh-extra.com/html/keithley/system-sourcemeter-2601b/system-sourcemeter-2601b_reference-manual_4009934259.webp)
Series 2600B System SourceMeter® Instrument Reference Manual
Section 5: Introduction to TSP operation
2600BS-901-01 Rev. B / May 2013
5-5
Digital I/O
The Models 2604B, 2614B, and 2634B do not have digital input/output lines. The commands to
control the digital input/output lines are not available for these models.
The digital I/O port of the instrument can control external circuitry (such as a component handler for
binning operations).
The I/O port has 14 lines. Each line can be at TTL logic state 1 (high) or 0 (low). See the pinout
diagram in
Digital I/O port
(on page 3-83) for additional information.
There are commands to read and write to each individual bit, and commands to read and write to the
entire port.
digio.readbit()
(on page 7-49)
digio.readport()
(on page 7-50)
digio.trigger[N].assert()
(on page 7-51)
digio.trigger[N].clear()
(on page 7-51)
digio.trigger[N].EVENT_ID
(on page 7-52)
digio.trigger[N].mode
(on page 7-52)
digio.trigger[N].overrun
(on page 7-54)
digio.trigger[N].pulsewidth
digio.trigger[N].release()
(on page 7-55)
digio.trigger[N].reset()
(on page 7-55)
digio.trigger[N].stimulus
(on page 7-56)
digio.trigger[N].wait()
(on page 7-58)
digio.writebit()
(on page 7-58)
digio.writeport()
(on page 7-59)
digio.writeprotect
(on page 7-60)
Display
display.clear()
(on page 7-60)
display.getannunciators()
display.getcursor()
(on page 7-62)
display.getlastkey()
(on page 7-63)
display.gettext()
(on page 7-64)
display.inputvalue()
(on page 7-65)
display.loadmenu.add()
(on page 7-67)
display.loadmenu.catalog()
(on page 7-68)
display.loadmenu.delete()
display.locallockout
(on page 7-69)
display.menu()
(on page 7-70)
display.numpad
(on page 7-71)
display.prompt()
(on page 7-71)
display.screen
(on page 7-73)
display.sendkey()
display.setcursor()
(on page 7-75)
display.settext()
(on page 7-76)
display.smuX.limit.func
(on page 7-77)
display.smuX.measure.func
(on page 7-78)
display.smuX.digits
(on page 7-77)
display.trigger.clear()
(on page 7-79)
display.trigger.EVENT_ID
display.trigger.overrun
(on page 7-79)
display.trigger.wait()
(on page 7-80)
display.waitkey()
(on page 7-81)
Summary of Contents for System SourceMeter 2601B
Page 841: ......