6
Mounting the STA-3108A1
Your STA-3108A1 screw terminal panel is shipped with the hardware necessary for mounting.
To mount the STA-3108A1:
• Place the STA-3108A1 at its operating location with the rubber feet on the mounting surface. Use the four (4) screws to
secure the panel.
Wiring the STA-3108A1
1. Before installing I/O cables and connecting I/O circuits to the STA-3108A1, refer to the User’s Guide for the board(s) to
which you are connecting the STA-3108A1.
2. Attach the 1284CC cable to the 36-pin D connector.
3. Attach the ribbon cable to the 50-pin connector.