![background image](http://html2.mh-extra.com/html/keithley/kusb-3160/kusb-3160_user-manual_3963629048.webp)
Chapter 5
36
Data appears to
be invalid.
An open connection
exists.
Check your wiring and fix any open
connections; see the instructions in the
KUSB-3160 Getting Started Manual
.
A signal source is not
connected to the
channel being read.
Check the transducer connections; see
the instructions in the
KUSB-3160 Getting
Started Manual
.
Computer does
not boot.
The power supply of
the computer is too
small to handle all the
system resources.
Check the power requirements of your
system resources and, if needed, get a
larger power supply; consult the module’s
specifications on
of this manual.
Table 4: Troubleshooting Problems (cont.)
Symptom
Possible Cause
Possible Solution
Summary of Contents for KUSB-3160
