KPCI-488LPA-900-01 Rev. A / December 2008
A-3
Model KPCI-488LPA GPIB Controller Interface Card User’s Manual
Appendix A: Status/Error Codes
NI command compatible function error codes
NI command compatible function error codes are listed in the following table. Note that, the error
variable is meaningful only when the
ERR
bit of the status variable,
ibsta
, is placed. Click the error
mnemonic, and you can obtain a detailed description and the solution for each error.
Table A-2
NI command compatible function error codes
Error Mnemonic iberr Value Meaning Description
EDVR
0
OS error
ECIC
1
Function requests GPIB board as CIC
ENOL
2
No listen device on the GPIB bus
EADR
3
GPIB board addressing error
EARG
4
Invalid argument
ESAC
5
GPIB board is not on the system controller requesting
status
EABO
6
I/O operation is aborted (timeout)
ENEB
7
GPIB board does not exit
EDMA
8
DMA error
EOIP
10
Asynchronous I/O in progress
ECAP
11
The operation is not performed
EFSO
12
File system error
EBUS
14
GPIB bus error
ESTB
15
The status byte queue of the sequential polling overflow
ESRQ
16
SRQ is stuck in ON state
ETAB
20
Table problem
