Keithley DMM7510, Reference Manual

Page: 962 / 1036

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual Section 8: TSP command reference
DMM7510-901-01 Rev. B / May 2015 8-349
tsplink.line[N].reset()
This function resets some of the TSP-Link trigger attributes to their factory defaults.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
tsplink.line[ N ].reset()
N The trigger line (1 to 3)
Details
The
tsplink.line[ N ].reset()
function resets the following attributes to their default values:
•
trigger.tsplinkin[ N ].edge
•
trigger.tsplinkout[ N ].logic
•
tsplink.line[ N ].mode
•
trigger.tsplinkout[ N ].stimulus
•
trigger.tsplinkout[ N ].pulsewidth
This also clears
trigger.tsplinkin[ N ].overrun
.
Example
tsplink.line[3].reset()
Resets TSP-Link trigger line 3
attributes to default values.
Also see
trigger.tsplinkin[N].edge (on page 8-339)
trigger.tsplinkin[N].overrun (on page 8-340)
trigger.tsplinkout[N].logic (on page 8-342)
trigger.tsplinkout[N].pulsewidth (on page 8-342)
trigger.tsplinkout[N].stimulus (on page 8-344)
tsplink.line[N].mode (on page 8-348)