Keithley DMM7510, Reference Manual

Page: 818 / 1036

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual Section 8: TSP command reference
DMM7510-901-01 Rev. B / May 2015 8-205
Example
print(eventlog.getcount(eventlog.SEV_INFO)) Displays the present number of unread
information messages in the instrument
event log.
If there are three information messages in
the event log, output is:
3
Also see
eventlog.clear() (on page 8-204)
eventlog.next() (on page 8-205)
localnode.showevents (on page 8-227)
Using the event log (on page 2-154)
eventlog.next()
This function returns the oldest unread event message from the event log.
Type TSP-Link accessible
Affected by Where saved Default value
Function Yes
Usage
eventNumber , message , severity , nodeID , timeSeconds , timeNanoSeconds =
eventlog.next()
eventNumber , message , severity , nodeID , timeSeconds , timeNanoSeconds =
eventlog.next( eventType )
eventNumber The event number
message A description of the event
severity The severity of the event,
•
Error:
1
•
Warning:
2
•
Information:
4
nodeID The TSP-Link node where the event occurred or
0
if the event occurred on the local
node
timeSeconds The seconds portion of the time when the event occurred
timeNanoSeconds The fractional seconds portion of the time when the event occurred
eventType
Limits the return to specific event log types; set a cumulative integer value that
represents the event log types to:
•
Errors only:
eventlog.SEV_ERROR
or
1
•
Warnings only:
eventlog.SEV_WARN
or
2
•
Errors and warnings only:
eventlog.SEV_WARN|eventlog.SEV_ERROR
or
3
•
Information only:
eventlog.SEV_INFO
or
4
•
Errors and information only:
eventlog.SEV_INFO|eventlog.SEV_ERROR
or 5
•
Warnings and information only:
eventlog.SEV_INFO|eventlog.SEV_WARN
or 6
•
All events:
eventlog.SEV_ALL
or
7