Keithley DMM7510, Reference Manual

Page: 433 / 1036

Section 6: SCPI command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
6-106 DMM7510-901-01 Rev. B / May 2015
[:SENSe[1]]:<function>:TCouple:RJUNction:SIMulated
This command sets the simulated reference temperature of the thermocouple reference junction.
Type Affected by Where saved Default value
Command and query Recall settings
Instrument reset
Power cycle
Measure configuration list Save settings
Measure configuration list Celsius: 23
Kelvin: 296.15
Fahrenheit: 73.4
Usage
[:SENSe[1]]:<function>:TCouple:RJUNction:SIMulated <tempValue>
[:SENSe[1]]:<function>:TCouple:RJUNction:SIMulated DEFault
[:SENSe[1]]:<function>:TCouple:RJUNction:SIMulated MINimum
[:SENSe[1]]:<function>:TCouple:RJUNction:SIMulated MAXimum
[:SENSe[1]]:<function>:TCouple:RJUNction:SIMulated?
[:SENSe[1]]:<function>:TCouple:RJUNction:SIMulated? DEFault
[:SENSe[1]]:<function>:TCouple:RJUNction:SIMulated? MINimum
[:SENSe[1]]:<function>:TCouple:RJUNction:SIMulated? MAXimum
<function> The function to which the setting applies; see Functions
<tempValue> The temperature:
•
Celsius: 0 to 65
•
Kelvin: 273 to 338
•
Fahrenheit: 32 to 149
Functions
VOLTage[:DC] RESistance TEMPerature VOLTage[:DC]:RATio
VOLTage:AC FRESistance CONTinuity DIGitize:VOLTage
CURRent[:DC] DIODe FREQuency[:VOLTage] DIGitize:CURRent
CURRent:AC CAPacitance PERiod[:VOLTage]
Details
This attribute applies to the temperature function when the transducer type is set to thermocouple and
the reference junction is set to simulated. It allows you to set the simulated temperature value.
Example
TEMP:TRAN TC
TEMP:TC:TYPE K
TEMP:UNIT C
TEMP:TC:RJUN:SIM 30
Sets 30 degrees Celsius as the simulated
reference temperature for thermocouples.
Also see
[:SENSe[1]]:<function>:TCouple:TYPE (on page 6-107)
[:SENSe[1]]:<function>:TRANsducer (on page 6-112)
[:SENSe[1]]:<function>:UNIT (on page 6-113)
Temperature measurements (on page 2-120)