3-26
Setup and Installation
4. Insert and secure the board connector in the selected slot.
5. Replace the computer chassis cover.
6. Plug in all cords and cables.
7. Turn power to the computer ON.
After you install the DAS-8 Series board in the computer, you can attach
an expansion board, if necessary, and wire the appropriate signals to the
board; refer to Section 4 for information. Before writing your application
program, you can test the functions of the DAS-8 Series board using the
DriverLINX AIO Panel or Test Panel for testing your DriverLINX
installation and configuration; verifying signal inputs to the DAS-8 Series
board; sending test signals to external devices.
Refer to the documentation provided with your computer for more
information on installing boards.
Configuring DriverLINX
After you have successfully installed the DAS-8 Series board in your
computer, start Windows to start DriverLINX. See the documentation
provided on the DriverLINX CD-ROM; especially the
DriverLINX
Installation and Configuration Guide
and the
DriverLINX Appendix F:
Configuration and Implementation Notes:Keithley DAS-8
manuals
.
Run “Learn DriverLINX” (LearnDL.exe) from the DriverLINX program
group to tell DriverLINX how you configured your DAS-8 Series board
and to verify that everything is properly installed and configured.
1. Start Windows as you normally would and select the Program
Manager window. Install DriverLINX if you have not previously
done so.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com