In this section:
Introduction ...............................................................................3-1
General installation considerations ...........................................3-1
Installation procedure ................................................................3-7
Probe card removal procedure ................................................3-10
Performance verification .........................................................3-10
Optional top-load (clamshell) mechanism installation .............3-12
Introduction
The installation procedures contained in this manual are intended for use only by qualified
service personnel. Do not perform these procedures unless qualified to do so. Failure to
observe normal safety precautions could result in personal injury or death.
This section contains information needed to install the 9139B Probe Card Adapter on your prober.
Several topics contain general installation steps. Other topics contain installation steps required for
your specific prober. Review the appropriate topics before handling or installing the 9139B.
General installation considerations
The following topics provide information you should know before installing the 9139B Probe
Card Adapter.
Use of the 9139A prober card in the 9139B Probe Card Adapter will result in
diminished performance.
Do not use the 9139A probe card in testing that exceeds 200 V. Testing in excess of 200 V
may damage test equipment or cause injury or death due to electric shock.
Section 3
Installation
