In this section:
Introduction .............................................................................. 3-1
Connecting to the instrument web interface ............................. 3-1
Web interface home page ........................................................ 3-2
Log in to the instrument ............................................................ 3-3
Card pages............................................................................... 3-3
Scan Builder page .................................................................... 3-8
TSB Embedded ...................................................................... 3-11
Introduction
The Model 707B or 708B web interface allows you to review instrument status, control the instrument,
and upgrade the instrument over a LAN connection.
The instrument web page resides in the firmware of the instrument. Changes you make through the
web interface are immediately made in the instrument.
Many examples in this manual and in the Models 707B and 708B Reference Manual can be run
through the TSB Embedded page of the instrument web interface.
Connecting to the instrument web interface
The instrument web interface requires the web browser plug-in Java
TM
SE Runtime Environment
Version 6 or later. The latest version of the plug-in is available from
http://www.java.com/en/download/manual.jsp
http://www.java.com/en/download/manual.jsp
).
Installation files are also available on the Models 707B and 708B Product Information CD-ROM that
came with your instrument.
The instrument web interface uses Java applets and, depending on your browser security settings,
may require your permission to download and install them.
To connect to the instrument web interface, you must have a LAN connection from the computer to
the instrument. See "LAN concepts and settings" in the Models 707B and 708B Reference Manual for
more information about configuring the Models 707B and 708B for a LAN connection, connecting the
Models 707B and 708B to the LAN, and establishing a LAN connection to the instrument.
Once the Models 707B and 708B is configured correctly and connected to the LAN, you can use the
Keithley LXI
®
Discovery Browser to identify the IP addresses of instruments that are connected to the
LAN and that support the VXI-11 discovery protocol. You can also manually set up the IP address.
Section 3
Using the web interface
