SCPI Command Reference
17-89
:SYSTem subsystem
The SYSTem subsystem contains miscellaneous commands that are summarized in
Table 17-8.
Default conditions
:PRESet
:SYSTem:PRESet
Return to :SYSTem:PRESet defaults
Description
This command returns the instrument to states optimized for front panel
operation. :SYSTem:PRESet defaults are listed in the SCPI tables
(Tables 17-1 through 17-10).
:POSetup
:SYSTem:POSetup <name>
Program power-on defaults
Parameters
<name> =
RST
Power-up to *RST defaults
PRESet
Power-up to :SYSTem:PRESet defaults
SAV0
Power-up to setup stored at memory location 0
SAV1
Power-up to setup stored at memory location 1
SAV2
Power-up to setup stored at memory location 2
SAV3
Power-up to setup stored at memory location 3
SAV4
Power-up to setup stored at memory location 4
Query
:POSetup?
Query power-on setup
Description
This command is used to select the power-on defaults. With RST selected,
the instrument powers up to the *RST default conditions. With PRES
selected, the instrument powers up to the :SYStem:PRESet default condi-
tions. Default conditions are listed in the SCPI tables (Tables 17-1 through
17-10).
With the SAV0-4 parameters speci
fi
ed, the instrument powers-on to the
setup that is saved in the speci
fi
ed location using the *SAV command.
Summary of Contents for 6430
