Keithley 4200-SCS-PK3-903-01, Quick Start Manual

Page: 12 / 30

Make keyboard and printer connections
1. Connect the printer connection to the USB port or the parallel
port, as needed for your printer.
2. Connect the keyboard to the USB port or mouse and keyboard
connector on the rear panel.
You can also connect an external monitor (user-supplied) to the
Model 4200-SCS.
Connect the test fixture and DUT to the
4200-SCS
To connect the test fixture and DUTs for the:

I-V test, see the I-V Test section graphic “Make connections for
the I-V test.”

C-V test, see the C-V Test section graphic “Make connections for
the C-V test.”
Power up the instrument
The 4200-SCS operates from a line voltage of 100 V to 240 V at a
frequency of 50 Hz or 60 Hz. Make sure the operating voltage in
your area is compatible.
The power cord supplied with the Model 4200-SCS contains a
separate ground wire for use with grounded outlets. When
proper connections are made, the instrument chassis is
connected to power line ground through the ground wire in the
power cord. Failure to use a grounded outlet may result in
personal injury or death due to electric shock.
Operating the instrument on an incorrect line voltage may cause
damage to the instrument, possibly voiding the warranty.