Section 1
:
Introduction
Series 3700 System Switch/Multimeter Quick Start Guide
1-4
Document Number: 3700S-903-01 Rev. A / August 2007
Displaying the unit's serial number
To display the serial number on the front panel:
NOTE
If the Series 3700 is in remote mode, press the
EXIT
key
once to place the unit in local
mode.
1. When in local mode, press the
MENU
key.
2. Scroll to the SYSTEM-INFO menu and press the
ENTER
key.
3. On the SYSTEM INFORMATION menu, scroll to the SERIAL# and press the
ENTER
key.
The Series 3700 serial number will be displayed.
Safety symbols and terms
The following symbols and terms may be found on the System Switch/Multimeter or used in this
manual:
The
symbol indicates that the user should refer to the operating instructions located in the
manual.
The
symbol shows that high voltage may be present on the terminal(s). Use standard safety
precautions to avoid personal contact with these voltages.
The
symbol on an instrument shows that the surface may be hot. Avoid personal contact to
prevent burns.
The
WARNING
heading used in this manual explains dangers that might result in personal
injury or death. Always read the associated information very carefully before performing the
indicated procedure.
The
CAUTION
heading used in this manual explains hazards that could damage the unit. Such
damage may invalidate the warranty.
Summary of Contents for 3706
Page 3: ......
Page 11: ......
Page 25: ......
Page 67: ......