background image

 

 

Keithley Instruments, Inc. 

28775 Aurora Road 
Cleveland, Ohio 44139 

Series 3700 Cables and Connector Kits

Installation Instructions

 

1-888-KEITHLEY 
www.keithley.com

 

 

                                
PA-949 Rev. D / May 2011 

1  

Introduction 

This instruction sheet contains information for the Keithley Instruments Series 3700 System Switch/Multimeter 
cables and connector kits. These kits include all necessary hardware to assemble cables and connectors, as 
needed. 

WARNING 

These installation instructions are intended for use by qualified service 
personnel only. Do not assemble connectors or make connections to them 
unless qualified to do so. Failure to recognize and observe normal safety 
precautions could result in personal injury or death. 

 

Do not exceed the maximum specifications of the switching module. 

General information 

The following table lists available cable and connector kits, the number of conncetor pins for each kit, and cable 
length (where applicable). 

Table 1: 

Series 3700 cables and connector kits

 

 

Model number 

Number of pins 

Description 

Length 

3720-MTC-1.5 

78 

Cable 

1.5 m (5 ft) 

3720-MTC-3 

78 

Cable 

3 m (10 ft) 

3721-MTC-1.5 

50 

Cable 

1.5 m (5 ft) 

3721-MTC-3 

50 

Cable 

3 m (10 ft) 

3722-MTC-1.5 

104 

Cable 

1.5 m (5 ft) 

3722-MTC-3 

104 

Cable 

3 m (10 ft) 

3722-MTC-1.5/MM 

104 

Cable 

1.5 m (5 ft) 

3722-MTC-3/MM 

104 

Cable 

3 m (10 ft) 

3732-MTC-1.5 

78 

Cable 

1.5 m (5 ft) 

3732-MTC-3 

78 

Cable 

3 m (10 ft) 

3790-KIT50-R 50 

Connector 

Kit  N/A 

3791-KIT78-R 78 

Connector 

Kit  N/A 

3792-KIT104-R 104 

Connector 

Kit  N/A 

3792-KIT104-R/F 104 

Connector 

Kit 

N/A 

Summary of Contents for 3700 series















Reviews: