3
2.3 Hydraulic tubing locations
Hydraulic pressure, generated by the tractor’s wet kit, powers the drive unit. Tubing must
connect the drive unit to the tractor.
The location of the hydraulic tubing cut holes are shown so that the tubing will line up with
the drive plumbing. Section 4.4 provides more information on this subject. A central loca-
tion is preferable for the quick-couplers in front of the container. This keeps hose lengths
down, if they stay connected while driving.
2.4 Cross-members
Cross-members function as support for the sub-deck.
After removing the flooring, the cross-members need to be shimmed. See section 2.5.
Figure 2
SECTION A-A
A
A
75362-2
Holes for tubing cut
thru cross-members
this side of container,
from drive opening
to front of container.
Centerline
697 [27 7/16 in]
789 [31 1/16 in]
38 [1 1/2 in]
35mm [1 1/2"]
Remove cross-members
to make Drive Unit opening.
1980 [78"]
Minimum Opening
5th Wheel Tunnel
DETAIL C
SCALE 1 / 4
DETAIL D
SCALE 1 / 4
C
D
75362-3
Shim Attached to
Container Cross-Member
#C-3003 Bearing
25mm x 25mm
Tubing
Figure 3
