Keison CARBOLITE AAF Series, Installation, Operation & Maintenance Instructions Manual

Page: 13 / 19

AAF, OAF, GSM, VMF
Door Plug Replacement
Lift the furnace door to the open position and remove the door cover from the plug carrier
assembly.
Remove the old door plug by sliding it upwards out of its carrier.
Slide the new plug into the carrier assembly making sure that the plug is the correct way up.
Refit the door cover.
When first heating the furnace after a replacement, ensure that the ventilation is good: emission of
some fumes may be expected.
5.11 Fuse Replacement
Fuses are marked on the circuit diagram (section 7.0) with type codes, e.g. F1, F2. A list of the
correct fuses is given in section 8.1.
Depending on model and voltage, the different fuse types may
or may not be fitted .
If any fuse has failed, it is advisable for an electrician to check the internal circuits.
Replace any failed fuses with the correct type. For safety reasons do not fit larger capacity fuses
without first consulting Carbolite.
The fuses are near the cable entry point, and access is by removal of the back panel.
6.0
MF06 13