keilhauer GSD Assembly Instructions Download Page 4

Page: 4 / 4

GSD Table

Ganging Instructions

sing the 5/32” hex key, fasten the table base sub

assembly to the table tops with 1/4 - 20 x 3/4” button
head cap screw and washer (x6) or (x8) per table top.

Place the assembled tables in their final position.

Press the table end cap (x2) over each end of the
channel.

Tool Required

5/32” Hex Allen Key

Hardware Included

Washer

1/4-20 x 3/4”
Button head cap screw
(x6) per 71 & 86 inch table
(x8) per 102 inch table

(x6) per 71 & 86 inch table
(x8) per 102 inch table

Underside of table
shown.

keilhauer.com

Summary of Contents for GSD

Page 1: ...asten the channel to the aluminum legs with with 1 4 20 x 1 2 button head cap screw x4 5 Overlap table brace x2 and place into aluminum legs Using the 5 32 hex key install the 1 4 20 x 1 2 button head...

Page 2: ...it s final position 8 Press the table end cap x2 over each end of the channel Attach the power cord to the leg with the cable clamp x3 and 8 32 x 3 8 cap screw x3 using the 3 32 hex key Place the asse...

Page 3: ...utton head cap screw x1 3 1 3 Screw the glide x2 into each aluminum table leg 2 Overlap table brace x1 and place into aluminum legs Using the 5 32 hex key install the 1 4 20 x 1 2 button head cap scre...

Page 4: ...able top Place the assembled tables in their final position 6 8 4 Press the table end cap x2 over each end of the channel 7 Tool Required 5 32 Hex Allen Key Hardware Included Washer 1 4 20 x 3 4 Butto...