GSD Table
Ganging Instructions
See GSD Table Assembly Instructions for General Assembly
Bar & Counter Table Only
Tool Required
5/32” Hex Allen Key
1/4” Hex Allen Key
Hardware Included
1/4-20 x 1”
Button head cap screw
(x1)
Using the 5/32” hex key, fasten the ganging channel to
the aluminum legs with 1/4”-20 x 1/2” button head cap
screw (x2).
Place the aluminum leg sub assembly on the ganging
channel. Using the 5/32” hex key, install the 1/4”-20 x 1”
button head cap screw (x1).
3
1
3
Screw the glide (x2) into each aluminum table leg.
2
Overlap table brace (x1) and place into aluminum legs. Using
the 5/32” hex key, install the 1/4”-20 x 1/2” button head
cap screw (x4). Attach brace (x1) to the channel with the
1/4”-20 x 3/4” flat head screw (x1) using the 5/32” hex key.
5
4
Glide
(x4)
1/4-20 x 1/2”
Button head cap screw
1/4-20 x 3/4”
Flat head cap screw
(x1) Bar & Counter
(x2) Conference
(x4) Bar & Counter
Using a #14 wrench and 1/4” hex key, fasten the ganging
channel to the table channels with 3/8 - 16 x 1” socket
head screw (x6) and 3/8” lock nut (x6).
3/8”
Lock Nut
(x6)
3/8-16 x 1”
Socket head screw
(x6)
#14 Wrench
keilhauer.com