GSD Table
Assembly Instructions
Bar & Counter Table Only
Tool Required
5/32” Hex Allen Key
Hardware Included
1/4-20 x 1”
Button head cap
screw (x2)
Screw the glide (x4) into each aluminum table leg.
Interlock the aluminum table legs (x2) by positioning
the bosses in line with their corresponding pockets. Pull
and hold the legs towards each other.
3
1
1
Place the aluminum leg sub assemblies at each
end of the channel. Using the 5/32” hex key, install
the 1/4”-20 x 1” button head cap screw (x2).
2
Using the 5/32” hex key, fasten the channel to the
aluminum legs with with 1/4”-20 x 1/2” button head cap
screw (x4).
5
Overlap table brace (x2) and place into aluminum legs. Using
the 5/32” hex key, install the 1/4”-20 x 1/2” button head
cap screw (x4). Attach brace (x2) to the channel with the
1/4”-20 x 3/4” flat head screw (x2) using the 5/32” hex key.
4
Using the 5/32” hex key, fasten the table base to the
table top with 1/4 - 20 x 3/4” button head cap screw
and washer (x6) or (x8).
6
Washer
Glide
(x4)
1/4-20 x 1/2”
Button head cap screw
1/4-20 x 3/4”
Flat head cap screw
(x2) Bar & Counter
1/4-20 x 3/4”
Button head cap screw
(x6) per 71 & 86 inch table
(x8) per 102 inch table
(x4) Conference
(x8) Bar & Counter
(x6) per 71 & 86 inch table
(x8) per 102 inch table
keilhauer.com