AWLA Conference Height Non- Powered Assembly Instructions
1
Place table top upside down on a clean surface. Proceed to fasten 1/4“ Post & Cap (x2 each per
leg) (
See Figure b).
DO NOT COMPLETELY UNWRAP TABLE TOP UNTIL STEP 6.
2
With a minimum of two assemblers, proceed to flip the table and place in its final position.
The
table top can now be completely unwrapped.
3
With a minimum of two assemblers, proceed to flip the table and place in its final position.
The table
top can now be completely unwrapped.
keilhauer.com
4