RAPT Pill Hydrometer & Thermometer Quick Start Guide
Page
6
of
18
Last Updated 6/05/2022 16:49 PM
Registering your Device
1. Sign up for a RAPT account
To utilise the Wi-Fi connectivity of the RAPT Pill you will need to sign up for an account on the RAPT
portal. This will allow you to track and monitor your specific gravity and fermentation temperature
in real time.
1.
Sign up for an account on the RAPT portal.
2.
Once signed up log in to your account on the RAPT portal.
2. Connect your smart phone or tablet to the RAPT Pills Wi-Fi Network
2.
Plug your Rapt Pill into a charger or computer with a USB-C cable (not included).
3.
On your smart phone or tablet, open your Wi-Fi settings and connect to the "RAPT Pill XXXX"
Wi-Fi network using the password "kegland1".
3. Open the RAPT Pill Captive Portal
1.
Once you have connected your smart phone or tablet to your RAPT Pills Wi-Fi network you
will need to open the RAPT Pill Captive Portal.
2.
Your smart phone or tablet should provide a prompt to sign into the network of your RAPT
Pill when you connect to its Wi-Fi Network. Clicking on this prompt will open the RAPT Pill
Captive Portal.
If you are not prompted to sign into the network of your RAPT Pill by your smart phone or
tablet then open your Wi-Fi
settings and select the “RAPT Pill XXXX”
Wi-Fi network again to
open the Pill Captive Portal.
TIP:
Once you have opened the RAPT Pill Captive Portal navigate to
Diagnostics
and write
down the
IP (AP)
. This is the IP address of your RAPT Pill and can be input into your web
browser to quickly connect the RAPT Pill Captive Portal when plugged into power.
Once you have connected to your RAPT Pill
’s
Wi-Fi network and opened the Pill Captive Portal you
will still need to connect your RAPT Pill to your home Wi-Fi network and register the device to your
RAPT account before the RAPT Pill will send any telemetry.
4. Connect the RAPT Pill to your home Wi-Fi network
1.
Select your home Wi-Fi network in the RAPT Pill captive portal, enter your Wi-Fi password
and select
Join
. This will connect your Pill to your Wi-Fi network.
NOTE: The RAPT Pill cannot connect to 5GHz networks so if you have a dual band router
make sure you are connecting to the 2.4GHz network.
2.
Once you have joined, click on the
Registration
link to see your
MAC address
and
User
Code
. Write both of these down or copy them on your device. You will need to enter the
MAC address and User Code to register your Pill on your RAPT account.
