Fermzilla All-Rounder Starter Kit Instruction Manual
Page
4
of
4
www.KegLand.com.au
Last Updated 19/03/2020 6:20 PM
2.
Fill the FermZilla with cold water and add Stellarclean according to the instructions
on the tub. Any other dirty brewing equipment can also be soaked in the fermenter.
3.
Stellarclean can be left in the vessel for up to 24 hours
4.
After a few hours of soaking, gently wipe away any soiling with a soft cloth. Make
sure not to use harsh scrubbers that may scratch the plastic and create ideal places
for batch-ruining bacteria to hide.
5.
Once the fermenter is clean, rinse the PBW out with warm water.
6.
Fill the FermZilla and collection vessel with cold water again and add Stellarsan
according to the instructions on the tub. Attach the lid and shake the full FermZilla to
coat all surfaces.
7.
Stellarsan can be left in the vessel until the next fermentation when it can be
emptied and your wort added.
Suggested Additional Equipment
Looking to improve your kit and have the right gear on hand to do the job in the best
possible way?
•
•
•
•
•
Digital Temperature Controller
•
or
•
FermZilla Pressure Kit (
•
Duotight – Blowtie 2 Spunding Valve
•
•
